NEXCOM PEAK 887VL2 - Manual (Page 52)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 38 PEAK 887VL2 User Manual
Chapter 3: BIOS Setup
System Agent (SA) Configuration
Save & Exit Advanced Chipset Boot Security Main
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Check to enable VT-d
function on MCH.
System Agent Bridge Name
System Agent RC Version
VT-d Capability
VT-d
Graphics Configuration
NB PCIe Configuration
Memory Configuration
Haswell
1.5.0.0
Supported
[Enabled]
VT-d
Enables or disables VT-d function on MCH.
Graphics Configuration
Configures the graphic chip settings.
NB PCIe Configuration
Configures the NB PCI Express settings.
Memory Configuration
Configures the memory settings.
Boot
This section is used to configure the boot features.
Quiet Boot
Enabled Displays OEM logo instead of the POST messages.
Disabled Displays normal POST messages.
Fast Boot
Enables or disables boot with initialization of a minimal set of devices
required to launch active boot option. Has no effect for BBS boot options.
Boot Option Priorities
Adjust the boot sequence of the system. Boot Option #1 is the first boot
device that the system will boot from, next will be #2 and so forth.
CSM Parameters
Parameters for OpROM execution, boot options, filter, etc.
Save & Exit Advanced Chipset Boot Security Main
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
OpROM execution, boot options
filter, etc. Quiet Boot
Fast Boot
Boot Option Priorities
CSM parameters
[Disabled]
[Disabled]