NEXCOM PEAK 887VL2 - Manual (Page 48)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 34 PEAK 887VL2 User Manual
Chapter 3: BIOS Setup
IR Device
This section is used to configure the IR device.
Serial Port
Enables or disables the serial port.
Advanced
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or Disable Serial Port
(COM)
IR Device
Serial Port [Disabled]
Parallel Port Configuration
This section is used to configure the parallel port.
Parallel Port
Enables or disables the parallel port.
Change Settings
Selects an optimal setting for the Super IO device.
Device Mode
Configures the operating mode of the parallel port. The options are Standard
Parallel Port Mode, EPP Mode, ECP Mode, EPP Mode & ECP Mode.
Advanced
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or Disable Parallel Port
(LPT/LPTE) Parallel Port Configuration
Parallel Port
Device Settings
Change Settings
Device Mode
[Enabled]
IO=378h;
[IO=378h;]
[Standard Parallel P. . .]