NEXCOM PEAK 886VL2 - Manual (Page 46)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 31 PEAK 886VL2 User Manual
Chapter 3: BIOS Setup
Serial Port 2 Configuration
This section is used to configure serial port 2.
Serial Port
Enables or disables the serial port.
Change Settings
Selects an optimal setting for the Super IO device.
Onboard Serial Port 2 Mode
Select this to change the serial port mode to RS232, RS422 or RS485.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or Disable Serial Port
(COM) Serial Port 2 Configuration
Serial Port
Device Settings
Change Settings
Onboard Serial Port 2 Mode
Onboard Serial Port Max Baud Rate
RS-485/422 receiver termination
[Enabled]
IO=2F8h; IRQ=3;
[Auto]
[RS232]
[115200 bps]
[Disabled]
Onboard Serial Port Max Baud Rate
Select this to change the max baud rate of the serial port.
RS-485/422 Receiver Termination
Enables or disables RS-485/422 receiver termination.