NEXCOM NEX 980 - Manual (Page 45)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 34 NEX 980 User Manual
Chapter 3: UEFI Setup Utility
3.3.10 USB Configuration
Advanced Main
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
To enable or disable USB 2.0
Controller. USB 2.0 Controller
USB 3.0 Controller
Legacy USB Support
Legacy USB 3.0 Support
[Enabled]
[Enabled]
[Enabled]
[Enabled]
Save & Exit H/M Monitor Boot Security
USB 2.0 Controller
Use this item to enable or disable the use of USB 2.0 controller.
USB 3.0 Controller
Use this item to enable or disable the use of USB 3.0 controller.
Legacy USB Support
Use this option to select legacy support for USB devices. There are four
configuration options: [Enabled], [Auto], [Disabled] and [UEFI Setup Only].
The default value is [Enabled]. Please refer to below descriptions for the
details of these four options: [Enabled] - Enables support for legacy USB.
[Auto] - Enables legacy support if USB devices are connected. [Disabled] -
USB devices are not allowed to use under legacy OS and UEFI setup when
[Disabled] is selected. If you have USB compatibility issues, it is recommended
to select [Disabled] to enter OS. [UEFI Setup Only] - USB devices are allowed
to use only under UEFI setup and Windows / Linux OS.
Legacy USB 3.0 Support
Use this option to enable or disable legacy support for USB 3.0 devices. The
default value is [Enabled].