NEXCOM NEX 980 - Manual (Page 44)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 33 NEX 980 User Manual
Chapter 3: UEFI Setup Utility
3.3.9 ACPI Configuration
Suspend to RAM
Use this item to select whether to auto-detect or disable the Suspend-to-
RAM feature. Select [Auto] will enable this feature if the OS supports it.
Check Ready Bit
Use this item to enable or disable the feature Check Ready Bit.
Advanced Main
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Select the highest ACPI sleep
state the system will enter when
the SUSPEND button is pressed. Suspend to RAM
Check Ready Bit
ACPI HPET Table
PS/2 Keyboard Power on
PCI Devices Power On
Ring-In Power On
RTC Alarm Power On
USB Keyboard/Remote Power On
USB Mouse Power On
[Auto]
[Enabled]
[Enabled]
[Disabled]
[Disabled]
[Disabled]
[By OS]
[Disabled]
[Disabled]
Save & Exit H/M Monitor Boot Security
ACPI HPET Table
Use this item to enable or disable ACPI HPET Table. The default value is
[Enabled]. Please set this option to [Enabled] if you plan to use this
motherboard to submit Windows® certification.
PS/2 Keyboard Power On
Use this item to enable or disable PS/2 keyboard to turn on the system from
the power-soft-off mode.
PCI Devices Power On
Use this item to enable or disable PCI devices to turn on the system from the
power-soft-off mode.
Ring-In Power On
Use this item to enable or disable Ring-In signals to turn on the system from
the power-soft-off mode.
RTC Alarm Power On
Use this item to enable or disable RTC (Real Time Clock) to power on the
system.
USB Keyboard/Remote Power On
Use this item to enable or disable USB Keyboard/Remote to power on the
system.
USB Mouse Power On
Use this item to enable or disable USB Mouse to power on the system.