NEXCOM NISE 3720E - Manual (Page 82)

Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved. 68 NISE 3720E Series User Manual
Appendix A: Power Consumption
Power Consumption Management
Purpose
The purpose of the power consumption test is to verify the power dissipation
of system, and the loading of power supply.
Test Equipment
PROVA CM-07 AC/DC CLAMP METER
Device Under Test
DUT: sys#1/
Test Procedure
1. Power up the DUT, boot into Windows 7 x64 Ultimate.
2. Entering standby mode (HDD power down).
3. Measure the power consumption and record it.
4. Run Burn-in test program to apply 100% full loading.
5. Measure the power consumption and record it.
Test Data
Sys #1
(Disabled Turbo Boot)
+24V
Full-Loading Mode 2.02A
Total 48.48W
Standby S3 Mode 0.09A
Total 2.16W