NEXCOM NISE 3720E - Manual (Page 63)

Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved. 49 NISE 3720E Series User Manual
Chapter 4: BIOS Setup
Save & Exit Advanced Chipset Boot Security Main
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
CPU Configuration Parameters. ► CPU Configuration
► SATA Configuration
► USB Configuration
► IT8786 Super IO Configuration
Advanced
The Advanced menu allows you to configure your system for basic operation.
Some entries are defaults required by the system board, while others, if
enabled, will improve the performance of your system or let you set some
features according to your preference.
Setting incorrect field values may cause the system to
malfunction.
CPU Configuration
This section is used to configure the CPU.
Advanced
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or disable CPU C states Intel SMX Technology
64-bit
EIST Technology
CPU C3 state
CPU C6 state
CPU C7 state
L1 Data Cache
L1 Code Cache
L2 Cache
L3 Cache
Hyper-threading
Active Processor Cores
Limit CPUID Maximum
Intel Virtualization Technology
EIST
Turbo Mode
CPU C states
CPU C3 Report
CPU C6 report
CPU C7 report
CPU C8 report
CPU C9 report
CPU C10 report
Supported
Supported
Supported
Supported
Supported
32 kB x 2
32 kB x 2
256 kB x 2
4096 kB
[Enabled]
[All]
[Disabled]
[Enabled]
[Disabled]
[Disabled]
[Enabled]
[Enabled]
[Enabled]
[CPU C7s]
[Enabled]
[Enabled]
[Enabled]
Hyper-threading
Enables or disables hyper-threading technology.
Active Processors Cores
Select the number of cores to enable in each processor package.
▼
▲