Chapter 3: system setup, Removing the top cover, Hapter – NEXCOM NISE 3720E User Manual
Page 47: Ystem, Etup
Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved.
33
NISE 3720E Series User Manual
Chapter 3: System Setup
C
haPter
3: s
ystem
s
etuP
Removing the Top Cover
1. Locate the 6 screws on the top cover.
2. Remove the screws then lift up the cover and remove it from the chassis.
CAUTION!
CAUTION!
CAUTION!
Prior to removing the chassis cover, make sure the unit’s power
is off and disconnected from the power sources to prevent
electric shock or system damage.
This manual is related to the following products: