NEXCOM NISE 3720E - Manual (Page 65)

Copyright © 2015 NEXCOM International Co., Ltd. All Rights Reserved. 51 NISE 3720E Series User Manual
Chapter 4: BIOS Setup
SATA Controller(s)
Enables or disables SATA device.
SATA Configuration
This section is used to configure the SATA drives.
Advanced
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or disable SATA Device. SATA Controller(s)
SATA Mode Selection
SATA2
SATA1
CFAST
MSATA
[Enabled]
[AHCI]
Empty
Empty
Empty
Empty
SATA Mode Selection
Configures the SATA as AHCI or RAID mode.
RAID This option allows you to create RAID or Intel Matrix Storage
configuration on Serial ATA devices.
AHCI This option configures the Serial ATA drives to use AHCI
(Advanced Host Controller Interface). AHCI allows the storage
driver to enable the advanced Serial ATA features which will
increase storage performance.
SATA2 to MSATA
Displays information on the devices connected to these interfaces.