NEXCOM NISE 300 - Manual (Page 92)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 78 NISE 300 User Manual
Appendix A: Power Consumption
Appendix A: Power Consumption
NISE 300 Power Consumption Table
Purpose
The purpose of the power consumption test is to verify the power dissipation
of system, and the loading of power supply.
Test Equipment/Software
▪ PROVA CM-07 AC/DC CLAMP METER
Device Under Test
▪ DUT: sys#1
Test Procedure
1. Power up the DUT, boot into Windows 7 x64 Ultimate
2. Entering standby mode (HDD power down)
3. Measure the power consumption and record it.
4. Run Burn-in test program to apply 100% full loading
5. Measure the power consumption and record it.
Test Equipment/Software
System
Configuration Sys#1
Chassis CHASSIS NISE300 VER:B
CPU Intel® Core™ i5-4402E Processor (3M Cache, up to 2.70 GHz)
Memory Transcend 4GB DDR3 1600 SO-DIMM (TS512MSK64V6H) X2
CPU board N/A
Mother board NISB300 REV:B
HDD HDD 2.5" SATA 160GB HITACHI:HTS545016B9A300 X2
FDD N/A
CD-ROM N/A
CFast Apacer CFast 32GB
Power Supply POWER ADAPTER FSP120-ACB 120W 24V/5A w/PSE MARK
Add-on Card mSATA (TS128GMSA740), NISK300LAN (x2), Sierra 8790V
CPU Cooler NISE300 CPU HEATSINK SHYUNG SHUHN
System FAN N/A
Keyboard Microsoft Wired Keyboard 600
Mouse Microsoft Basic Optical Mouse
Monitor ASUS VS228
Test Result
Sys #1
(Disabled Turbo Boot)
Sys #1
(Disabled Turbo Boot)
+19V +30V
Full-Loading Mode 2.49A 1.61A
Total 47.31W 48.3W
Standby S3Mode 0.13A 0.11A
Total 2.47W 3.3W