NEXCOM NISE 300 - Manual (Page 79)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 65 NISE 300 User Manual
Chapter 4: BIOS Setup
Serial Port 3 Configuration
This section is used to configure serial port 3.
Serial Port
Enables or disables the serial port.
Change Settings
Selects an optimal setting for the Super IO device.
RS485 Auto Direction
Enables or disables RS485 auto direction.
Onboard Serial Port Max Baud Rate
Select this to change the max baud rate of the serial port.
Advanced
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or Disable Serial Port
(COM) Serial Port 3 Configuration
Serial Port
Device Settings
Change Settings
RS485 Auto Direction
Onboard Serial Port Max Baud Rate
[Enabled]
IO=2E8h; IRQ=7;
[IO=2E8h; IRQ=7;]
[Disabled]
[115200 bps]
Serial Port 4 Configuration
This section is used to configure serial port 4.
Serial Port
Enables or disables the serial port.
Change Settings
Selects an optimal setting for the Super IO device.
Onboard Serial Port Max Baud Rate
Select this to change the max baud rate of the serial port.
Advanced
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or Disable Serial Port
(COM) Serial Port 4 Configuration
Serial Port
Device Settings
Change Settings
Onboard Serial Port Max Baud Rate
[Enabled]
IO=2F0h; IRQ=11;
[IO=2F0h; IRQ=11;]
[115200 bps]