NEXCOM NISE 300 - Manual (Page 86)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 72 NISE 300 User Manual
Chapter 4: BIOS Setup
LCD Control
Chipset
Version 2.15.1236. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Select the Video Device which
will be activated during POST.
This has no effect if external
graphics present. Secondary boot
display selection will appear
based on your selection.
VGA modes will be supported
only on primary display
LCD Control
Primary IGFX Boot Display
Secondary IGFX Boot Display
LCD Panel Type
Active LFP
Panel Color Depth
[DVI]
[Disabled]
[1280x1024 Dual 24bit]
[No LVDS]
[18 Bit]
Primary IGFX Boot Display
Select the video device which will be activated during POST. Has no effect
if external graphics is present. Secondary boot display selection will appear
based on your selection. VGA modes will be supported only on primary
display.
Secondary IGFX Boot Display
Select the secondary display device.
LCD Panel Type
Select the LCD panel used by the internal graphics device by selecting the
appropriate setup item.
Active LFP
Select the Active LFP configuration.
No LVDS VBIOS does not enable LVDS.
Int-LVDS VBIOS enables LVDS driver by Integrated encoder.
Panel Color Depth
Select the LFP Panel Color Depth.