NEXCOM NISE 300 - Manual (Page 75)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 61 NISE 300 User Manual
Chapter 4: BIOS Setup
Advanced
Version 2.15.1236. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or disable SATA Device. SATA Controller(s)
SATA Mode Selection
CFAST
SATA2
MSATA
SATA1
[Enabled]
[AHCI]
Empty
Empty
TS32GMSA630 (32.0GB)
Empty
SATA Controller(s)
Enables or disables the SATA controller.
SATA Configuration
This section is used to configure the SATA drives.
SATA Mode Selection
Configures the SATA as IDE, AHCI or RAID mode.
IDE This option configures the Serial ATA drives as Parallel ATA
physical storage device.
RAID This option allows you to create RAID or Intel Matrix Storage
configuration on Serial ATA devices.
AHCI This option configures the Serial ATA drives to use AHCI
(Advanced Host Controller Interface). AHCI allows the storage
driver to enable the advanced Serial ATA features which will
increase storage performance.