NEXCOM ICES 667 - Manual (Page 91)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 77 ICEK 667-T6 Starter Kit User Manual
Chapter 4: BIOS Setup
Serial Port 5 Configuration
This section is used to configure serial port 5.
Serial Port
Enables or disables the serial port.
Change Settings
Selects an optimal setting for the Super IO device.
Console Redirection
Enables or disables console redirection.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or Disable Serial Port
(COM)
Serial Port 5 Configuration
Serial Port
Device Settings
Change Settings
[Enabled]
IO=2E0h; IRQ=7;
[IO=2E0h; IRQ=7;]
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Console Redirection Enable or
Disable.
COM0 (Disabled)
Console Redirection
COM1 (Pci Bus0, Dev0, Func0) (Disabled)
Console Redirection
Serial Port for Out-of-Band Management/
Windows Emergency Management Services (EMS)
Console Redirection
Console Redirection Settings
[Enabled]
Serial Port Console Redirection
This section is used to configure the serial port console redirection.
►