Cpu configuration, Sata configuration – NEXCOM ICES 667 User Manual
Page 84
![background image](https://www.manualsdir.com/files/769620/content/doc084.png)
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
70
ICEK 667-T6 Starter Kit User Manual
Chapter 4: BIOS Setup
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enabled for Windows XP and
Linux (OS optimized for Hyper-
Threading Technology) and
Disabled for other OS (OS not
optimized for Hyper-Threading
Technology). When Disabled
only one thread per enabled core
is enabled.
CPU Configuration
Intel(R) Core(TM) i7-3610QE CPU @ 2.30GHz
CPU Signature
Microcode Patch
CPU Speed
Processor Cores
Intel HT Technology
Intel VT-x Technology
Intel SMX Technology
64-bit
Hyper-Threading
Intel Virtualization Technology
306a9
12
2300 MHZ
4
Supported
Supported
Supported
Supported
[Enabled]
[Disabled]
CPU Configuration
This section is used to configure the CPU.
Hyper-Threading
This field is used to enable or disable hyper-threading.
Intel
® Virtualization Technology
Enables or disables Intel® Virtualization technology.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or disable SATA Device.
SATA Controller(s)
[Enabled]
SATA Mode Selection
[IDE]
Serial ATA Port 0
Empty
Software Preserve
Unknown
Serial ATA Port 1
Empty
Software Preserve
Unknown
Serial ATA Port 2
Empty
Software Preserve
Unknown
Serial ATA Port 3
Empty
Software Preserve
Unknown
SATA Configuration
This section is used to configure the SATA drives.
SATA Controller(s)
Enables or disables the SATA controller.