NEXCOM ICES 667 - Manual (Page 19)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 5 ICEK 667-T6 Starter Kit User Manual
Chapter 1: Product Introduction
Hardware Specifications
Form Factor
▪ ATX Carrier MB, dimension: 305mm x 244mm (12” x 9.6”)
▪ COM Express Evaluation CRB: PICMB COM Express board-to-board
interconnectors, type 6 pin-put, female, 8mm stack-up height, COM.0
Rev. 2.0
NEXCOM Computer-on-Modules Support List
▪ Basic Size (125x 95mm) : ICES 667 and ICES 668
Expansion
▪ 1x PCIe x16 slot, support PEG interfaces
▪ 1x DDI (SDVO/ HDMI/ DP by orange color PCIe x16 slot)
▪ 1x PCIe x4 slot, optional 4x PCIe x1 signals
▪ 1x PCIe x1 slot and 1x mini-PCIe slot for Wi-Fi with SIM tray
Graphic Interfaces
▪ Graphic Chip: from Type 6 pin-out, COM Express module
▪ CRT: support analog VGA with DB15 connector on the I/O edge
▪ LVDS: dual channels 18/ 24-bit LVDS connector (dual DF-13-20P)
▪ DDI (in PCIe x16): optional EBK-A2HDMI riser card for HDMI or DP
Super I/O
▪ ITE8783
I/O Interface
▪ Serial COM: 6 ports
– 1x edge DB9 connector to support RS232/ 422/ 485
(+5/ +12V by Ring)
– 5x internal box-header 2.0 pitch to support RS232
▪ USB: 12 ports 4x USB 3.0 and 8x USB2.0 ports
– 4x USB 3.0/ 4x USB 2.0 ports by stack Type A on edge
– 3x USB 2.0 by 4-pins JST2.0mm JST connector,
– 1x internal USB 2.0 to mini-PCIe slot for external Wi-Fi module
▪ SATA: 4 ports
– 2x SATA 3.0 ports
– 1x mini-SATA by mini-PCIe slot for half/ full size mini-SATA/ SSD
– 1x CFAST slot for CFAST/ SATA 2.0
▪ PS/2: internal 2x 4-pins header for Keyboard/ Mouse
▪ GPIO ports: 2x + 8x pins GPIO signals from COMe
(default 5V TTL/ option 3.3V)
Network
▪ ETH0: LAN port Connected from COMe CPU module (ICES 668)
▪ ETH0: Support 1x RJ45/ GbE LAN port on the edge I/O
▪ ETH1: Support 2nd RJ45/ GbE LAN port by Intel 82574L on the edge I/O
▪ ETH0 and ETH1 support Boot from LAN (PXE)
▪ ETH0 and ETH1 support Wake-on-LAN (when +5Vsb power available)
Audio
▪ HD Audio AL886 with 5.1 channels
▪ Support external S/PDIF interface
▪ Support internal pin-header for L/R speaker-out 2W/ 4 Ohm
▪ Onboard buzzer