NEXCOM ICES 268 - Manual (Page 88)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 74 ICEK 268-T2 Starter Kit User Manual
Chapter 4: BIOS Setup
Serial Port 1 Configuration
This section is used to configure serial port 1.
Serial Port 0 Configuration
This section is used to configure serial port 0.
Serial Port
Enables or disables the serial port.
Change Settings
Selects an optimal setting for the Super IO device.
Device Mode
Changes the serial port mode.
Serial Port
Enables or disables the serial port.
Change Settings
Selects an optimal setting for the Super IO device.
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or Disable Serial Port
(COM) Serial Port 1 Configuration
Serial Port
Device Settings
Change Settings
Device Mode
[Enabled]
IO=2F8h; IRQ=3;
[Auto]
[Standard Serial Po. . .]
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or Disable Serial Port
(COM) Serial Port 0 Configuration
Serial Port
Device Settings
Change Settings
[Enabled]
IO=3F8h; IRQ=4;
[Auto]