NEXCOM ICES 268 - Manual (Page 83)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 69 ICEK 268-T2 Starter Kit User Manual
Chapter 4: BIOS Setup
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enabled for Windows XP and
Linux (OS optimized for Hyper-
Threading Technology) and
Disabled for other OS (OS not
optimized for Hyper-Threading
Technology). When Disabled
only one thread per enabled core
is enabled.
CPU Configuration
Intel(R) Core(TM) i5-3610ME CPU @ 2.70GHz
CPU Signature
Microcode Patch
CPU Speed
Processor Cores
Intel HT Technology
Intel VT-x Technology
Intel SMX Technology
64-bit
Hyper-Threading
Intel Virtualization Technology
306a9
12
2700 MHz
2
Supported
Supported
Supported
Supported
[Enabled]
[Disabled]
Advanced
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or disable System
wake on alarm event. When
enabled, System will wake on the
hr::min::sec specified
Wake system with Fixed Time [Disabled]
CPU Configuration
This section is used to configure the CPU.
Hyper-Threading
This field is used to enable or disable hyper-threading.
Intel ® Virtualization Technology
When this field is set to Enabled, the VMM can utilize the additional
hardware capabilities provided by Vanderpool Technology.
RTC Wake Settings
This section is used to configure RTC Wake settings.
Wake System with Fixed Time
Enables or disables system wake on alarm event. When enabled, system will
wake on the hr::min::sec specified.