NEXCOM EBC 354 User Manual

Page 8

viii

EBC 354 User Manual

Warranty and RMA

recommended that you do not use needle-nose pliers to disconnect
connections as these can damage the soft metal or plastic parts of the
connectors.

Safety Precautions

1. Read these safety instructions carefully.

2. Keep this User Manual for later reference.

3. Disconnect the equipment from any AC outlet before cleaning or

installing a component inside the chassis. Use a damp cloth. Do not use
liquid or spray detergents for cleaning.

4. To prevent electrostatic build-up, leave the board in its anti-static bag

until you are ready to install it.

5. For plug-in equipment, the power outlet socket must be located near

the equipment and must be easily accessible.

6. Keep the board away from humidity.

7. Put the board on a stable surface. Dropping it or letting it fall may cause

damage.

8. Wear anti-static wrist strap.

9. Do all preparation work on a static-free surface.

10. Make sure the voltage of the power source is correct before

connecting the equipment to the power outlet.

11. Hold the board only by its edges. Be careful not to touch any of the

components, contacts or connections.

12. All cautions and warnings on the board should be noted.

13. Use the correct mounting screws and do not over tighten the screws.

14. Keep the original packaging and the anti-static bag; in case the board

has to be returned for repair or replacement.

Technical Support and Assistance

1. For the most updated information of NEXCOM products, visit

NEXCOM’s website at www.nexcom.com.

2. For technical issues that require contacting our technical support team

or sales representative, please have the following information ready
before calling:

- Product name and serial number

- Detailed information of the peripheral devices