NEXCOM EBC 354 User Manual

Page 20

Text mode
Original mode

EBC 354 User Manual

Chapter 2 : Jumpers and Connectors

• If possible, wear a grounded wrist strap when you are working inside the

computer case. Alternatively, discharge any static electricity by touching
the bare metal chassis of the unit case, or the bare metal body of any
other grounded appliance.

• Hold electronic circuit boards by the edges only. Do not touch the

components on the board unless it is necessary to do so. Don’t flex or
stress the circuit board.

• Leave all components inside the static-proof packaging that they shipped

with until they are ready for installation.

• Use correct screws and do not over tighten screws.