NEXCOM EBC 352 - Manual (Page 63)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 50
Chapter 3: BIOS Setup
EBC 352 User Manual
4. When the Password Installed dialog box appears, select OK.
To change the password, repeat the same steps above.
After you have set the user password, the Clear User Password and
Password Check fields will appear.
Install or Change the
password.
BIOS SETUP UTILITY
v02.67 (C)Copyright 1985-2009, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
Enter Change
F1 General Help
F10 Save and Exit
ESC Exit
Security
Security Settings
Supervisor Password : Installed
User Password : Not Installed
Change Supervisor Password
Change User Password
Password Installed
[OK]
Clear User Password
To clear the password, select Clear User Password then press .
Click OK.
BIOS SETUP UTILITY
v02.67 (C)Copyright 1985-2009, American Megatrends, Inc.
Security
Security Settings
Supervisor Password : Installed
User Password : Not Installed
Change Supervisor Password
Change User Password
Clear User Password
Password Check
Clear User Password?
[OK] [Cancel]
Immediately clears the
User password.
← → Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Password Check
Setup
The BIOS checks for the user password whenever accessing the Setup
utility.
Always
The BIOS checks for the user password when accessing the Setup util-
ity and booting the system.