NEXCOM EBC 352 - Manual (Page 60)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 47
Chapter 3: BIOS Setup
EBC 352 User Manual
3. Press to confirm the new password.
Install or Change the
password.
BIOS SETUP UTILITY
v02.67 (C)Copyright 1985-2009, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
Enter Change
F1 General Help
F10 Save and Exit
ESC Exit
Security Settings
Supervisor Password : Not Installed
User Password : Not Installed
Change Supervisor Password
Change User Password
Security
Confirm New Password
4. When the Password Installed dialog box appears, click OK.
Install or Change the
password.
BIOS SETUP UTILITY
v02.67 (C)Copyright 1985-2009, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
Enter Change
F1 General Help
F10 Save and Exit
ESC Exit
Security Settings
Supervisor Password : Not Installed
User Password : Not Installed
Change Supervisor Password
Change User Password
Security
Password Installed
[OK]
To change the password, repeat the same steps above.
To clear the password, select Change Supervisor Password then press
. The Password Uninstalled dialog box will appear.
If you forgot the password, you can clear the password by erasing the
CMOS RTC (Real Time Clock) RAM using the Clear CMOS jumper. Re-
fer to the Jumper Settings section in chapter 2 for more information.