NEXCOM EBC 352 - Manual (Page 55)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 42
Chapter 3: BIOS Setup
EBC 352 User Manual
Chipset
This section is used to configure the system based on the specific features
of the chipset.
Setting incorrect field values may cause the system to malfunc-
tion.
BIOS SETUP UTILITY
Exit
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
Boot Security Main Advanced Chipset
Configure North Bridge
features.
Advanced Chipset Settings
WARNING: Setting wrong values in below sections may cause system
to malfunction.
u North Bridge Configuration
u South Bridge Configuration
BIOS SETUP UTILITY
v02.61 (C)Copyright 1985-2006, American Megatrends, Inc.
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
North Bridge Chipset Configuration
PCI MMIO Allocation: 4GB to 3072MB
Initiate Graphic Adapter [IGD]
Internal Graphics Mode Select [Enabled, 8MB]
PEG Port Configuration
DVMT Mode Select [DVMT Mode]
DVMT/FIXED Memory [256MB]
Boot Display Device [CRT + LVDS]
Flat Panel Type [1024x768 18bit S]
Chipset
North Bridge Configuration
Select which graphics
controller to use as the
primary boot device.
Initiate Graphic Adapter
Selects the graphics controller to use as the primary boot device.
Internal Graphics Mode Select
Selects the internal graphics mode.