NEXCOM EBC 352 - Manual (Page 50)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 37
Chapter 3: BIOS Setup
EBC 352 User Manual
Super IO Configuration
This section is used to configure the I/O functions supported by the on-
board Super I/O chip.
Allows BIOS to select
Serial Port1 Base
Address.
BIOS SETUP UTILITY
← → Select Screen
↑↓ Select Item
+- Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Configure Ite8783 Super IO Chipset
Serial Port1 Address [Disabled]
Serial Port2 Address [Disabled]
Serial Port2 Frequency Mode [RS232]
Serial Port3 Address [Disabled]
Serial Port4 Address [Disabled]
Advanced
v02.67 (C)Copyright 1985-2009, American Megatrends, Inc.
Serial Port1 Address and Serial Port4 Address
Auto The system will automatically select an I/O address for the on-
board serial port.
3F8/IRQ4, 2F8/IRQ3, 3E8/IRQ4, 2E8/IRQ3 Allows you to manually select
an I/O address for the onboard serial port.
Disabled Disables the onboard serial port.
Serial Port2 Frequency Mode
Sets Serial Port2 to function as a serial port or IrDA.