KLING & FREITAG K&F CD 44 Digital System controller - Manual (Page 75)

User's manual K&F CD 44 Digital System Controller
KLING & FREITAG GMBH © 2014 Version 11.6 Page 75 of 77
Supported sample rates 44.1 - 192 kHz, internal dejittering via
sample rate converter
Digital-to-Analog Outputs
Output impedance <40 Ohm, electronically balanced
Nominal output level +6 dBu
Maximum output level +18 dBu
Frequency response +0/-0.2 dB, 2 Hz to 20 kHz
THD + noise 0.0006 % (-105 dB) typical @ 1 kHz/-1 dBfs
Dynamic range 119 dB typical, 20 Hz to 20 kHz, A-
weighted @ +18 dBu
Analog-In to Analog-Out
Frequency response 20 Hz to 20 kHz, ±0.1 dB
Dynamic range 115 dB typical, 20 Hz to 20 kHz,
unweighted
THD + noise 0.0007 % (-103 dB) typical @ 1 kHz / +17
dBu (all gains zero)
0.001 % (-100 dB) typical @ 1 kHz / +6 dBu
(all gains zero)
Conversion resolution 24 Bit
Internal sample rate 96 kHz
Internal data path 28 bit integer, arithmetic precision: 76 bit
System propagation delay 0.5 ms (analogue to analogue)
Remote Interface
RJ45 EtherCon™ connector for a
10/100Base-TX
ethernet (IP) connection
Power supply
AC 100 - 240 V~ / 50 - 60 Hz
I nom. 150 - 100 mA
Dimensions and Weight
Dimensions (W x H x D*) 1 RU rack mount: 483 x 44 x 192 mm (19"
× 1.75" × 7.6")
*installation depth incl. power cord 260
mm (10.236")