KLING & FREITAG K&F CD 44 Digital System controller - Manual (Page 44)

User's manual K&F CD 44 Digital System Controller
KLING & FREITAG GMBH © 2014 Version 11.6 Page 44 of 77
If you use an ACCESS B10 with EP-5 connectors (the same applies to ACCESS B5), we
recommend making and using an adapter cable from Speakon to EP-5. This adapter may
only be used if you connect the B10 to a Speakon connector of the CD 44 that has only one
connected channel. An example where the ACCESS B10 is connected to a CD 44 Speakon
connector that is connected on two channels is shown on page 54.
When using with ACCESS speakers, we generally recommend using a connector panel from
the K&F CP Series. If you do not have this connector panel, you can also connect the ACCESS
speaker directly to the controller with the help of this example.
8.4 Routing '1 in 4 out (Linked)' / Setup 'Example 2'