KLING & FREITAG K&F CD 44 Digital System controller - Manual (Page 34)

User's manual K&F CD 44 Digital System Controller
KLING & FREITAG GMBH © 2014 Version 11.6 Page 34 of 77
• limiter settings for operating and malfunction safety.
• high and low pass filters for multiway speaker systems (tops with subwoofers).
• phase correction between tops and subwoofers in multiway systems.
• bass boost for full-range systems (tops.
A wrong assignment of the LS-Blocks may ruin the loudspeakers.
Table with the currently available LS-Blocks, their ranges of use, and their recommended
combination with other LS-Block.
Name LS-Block Application
AccessB10 120Hz* ACCESS B10 combined with ACCESS T5 / T9
(without ACCESS B5)
AccessB10 55Hz* ACCESS B10 combined with ACCESS T5 / T9 and
flown ACCESS B5
AccessB10 60Hz* ACCESS B10 combined with ACCESS T5 / T9 and
standing ACCESS B5
AccessB5* ACCESS B5 combined with ACCESS T5/T9
ACCESS High High frequency channel for the ACCESS T5 / T9
Access Mid Clus Mid frequency channel for ACCESS T5 / T9, for
clustered flown or standing systems.
Access Mid Sngl Mid frequency channel for ACCESS T5 / T9, for
single standing or flown systems
B10 SubLow ACCESS B10 combined with speakers of the CA
and Line Series and with subwoofer ACCESS B5 or
subwoofers of the SW Series.
ACCESS B10 combined with flown speakers of the
CA and Line Series in full-range mode (FR).
B10* ACCESS B10 combined with speakers of the CA and
Line Series
B5* ACCESS B5 combined with speakers of the CA and
Line Series
CA… or Line
212…LCut CA… oder Line 212…FR
CA… oder Line
212…FR Top speaker in full-range mode (without combined
subwoofers)
Flat Special application, e. g. for editing or forwarding
of line signals or the using of ...
* Use the LS-Blocks B10 and B5 solely for usages without ACCESS top speakers (i.e. Line
212 or speakers from the CA Series) and the LS-Blocks ACCESS B10, ACCESS B10 55Hz,
ACCESS B10 60Hz and ACCESS B5 only when ACCESS top speakers are being used.
Name LS-Block Application