KBC Networks EE2CL - Manual (Page 11)

Extended Ethernet User Manual
Manual-EE2CL_Series-Rev1304.docx
Copyright © KBC Networks Ltd. 2013
Page 11 of 19 www.kbcnetworks.com
2.3.2 Rack-mount
• Remove all packaging material.
• For each of the 1:4 BNC Splitter Adaptors, push the BNC connectors through
the holes in the front panel of the rack and secure into place. Ensure that
the BNC connectors are properly positioned so that they do not have contact
with the metal rack, before clamping into place.
• Position the PSUs into the internal PSU brackets, they do not need to be
secured in place, ensure that the slot in the front is lined up with the PSU
mains pins.
• Position the EE2CL units into the internal brackets and secure with the nuts
and bolts provided with the rack.
• Attach the 1:4 BNC Splitter Adaptor to the connector on the EE2CL unit.
• Connect the kettle lead through the front panel into the PSUs.
• Switch the power on.
See section 2.7 for LED status.