KBC Networks H.264 Encoder - Manual (Page 4)

Encoder User Manual
Manual-H264_ENC-Rev1207A
Copyright © KBC Networks 2012
Page 4 of 49 www.kbcnetworks.com
1.2 Technical Specification
ENC-A Specification
Standards
IEEE Standards
IEEE 802.3 10BASE-T
IEEE 802.3u 100BASE-TX
IEEE 802.3x Full Duplex
Image
Compression H.264*, MPEG-4, MJPEG
Digital Resolution
QCIF (160 x 112 – NTSC,
176 x 144 – PAL)
CIF (352 x 240 – NTSC,
352 x 288 – PAL)
D1* (720 x 480 – NTSC,
(720 x 576 – PAL)
Bit Rate 28Kbps ~ 6Mbps
Image Frame Rate
30 FPS full D1 resolution (NTSC)
25 FPS full D1 resolution (PAL)
Composite Input
CVBS, 1.0V p-p with 75Ω loading
BNC Connector
Interface
LAN/WAN Port RJ-45 (10/100base-T)
Serial Port
4 pin terminal block
(RS-232 / 422 / 485)
Mode switch selectable
Digital Alarm I/O 4 pin terminal block
DI/DO Connection Type TTL 1 input, 1 output
Digital Alarm Input (DI)
To Trigger (low)
Logic level 0: 0 ~ 0.8V
Normal (high)
Logic level 1:2.31 ~ 5.3V
Digital Alarm Output (DO)
To Trigger (high)
Logic level 1: 2.8 ~ 3.3V
Normal (low)
Logic level 0:0 ~ 0.5V
General
Built-in web server and network
interface
Network
Protocol Supported
TCP, UDP, IP, HTTP, PPPoE, DNS, DDNS,
DHCP, IGMP, RTP, RTSP, IPv6, FTP,
SMTP, NTP, ICMP, ARP
QoS Layer 2, 3
* Denotes default configuration