Junger Audio b43 - Digital Audio Toolbox - Manual (Page 23)

5. SETUP
operation manual b43, chapter 5 -Setup- page 5-3
Main display shows either input level, output level or input gain
setting for all four channels.
Audio level is displayed as bargraph. This display is not scaled.
Two segments are appr. 2dB of audio level. The level display
gives information about the existence and the size of the audio
signals.
I 1: IIIIIII i 2:
IIIIIII
i 3: IIII i 4:
IIIIIIIIII
I = input level O = output level
After selection a certain setup menu by pushing SELECT button
one can adjust displayed parameters.
CONTROL
selection of parameter, selected parameter
blinks on display
CONTROL
adjustment of selected parameter
(see also parameter overview)
Each time SELECT button is pushed it opens another setup
menu. After finishing of settings EXIT button switches back to
main display. All basic settings are stored automatically.
Note: After finishing of adjustment of INPUT or OUTPUT
parameters the EXIT button switches back to main display
without permanent storage of values. If you want to store
changed parameters as preset you have to store them by
using „store preset key“-function (see 5.4).
All settings for INPUT and OUTPUT processing are storable into
8 individual presets.
SELECT selection of storing preset key menu
PRESET 1...8 storage of current settings
into preset 1...8
5.2
MAIN DISPLAY
5.3
ADJUSTMENT OF
SETUP
PARAMETERS
5.4
STORAGE OF
PRESETS
turn
push
push
push