Junger Audio D*AP LM2 / D*AP LM4 - Digital Audio Processor - Manual (Page 25)

21
D*AP LM 4
Web GUI – INTERFACE – SDI I/O Interface – Status
Status – Indicates the current status major SDI settings and parameters.
Video Standard display of the video standard detected by the SDI input.
SDI Bypass turns yellow if the SDI bypass function is activated.
Relay Bypass turns yellow if the power fail relay is deactivated manually.
Test Generator Active turns yellow if the Generator is turned on.
Video Delay Enabled turns green if the video delay is activated.
De-Embedder Audio Status is grey if no audio is present
turns green if PCM audio is embedded
turns yellow if a non audio signal is present, an additional label shows
the kind of signal if it is possible to gather the information.
ARIB B39 meta information standard.
Data Available turns green if ARIB B-39 meta information are detected.
Block Error turns red if an error has been detected.
Audio Mode see ARIB Japanese standard "Structure of Inter-Stationary Control
Data Conveyed by Ancillary Data Packets" :
http://www.arib.or.jp/english/html/overview/doc/2-STD-B39v1_2.pdf