Junger Audio D*AP LM2 / D*AP LM4 - Digital Audio Processor - Manual (Page 19)

15
D*AP LM 4
Web GUI – SYSTEM – System Status
System Status – Provides a current overview of critical system parameters including device, processing and
interface status along with a system log and any system messages.
Device Status
provides the hardware status of the LM 4
Power 1 status of the first power supply (left hand side from rear)
Power 2 (optional) status of second power supply (right hand side from rear)
Temperature measured on the surface of the main PCB
Sync Lock turns red if the external sync source is removed or unstable
Processing Status
Bypass turns red if Bypass is activated
Interface Status
AES I/O turns red if an AES input that is internally in use (i.e you have routed it to
an input of a function block) has detected an error
SDI I/O Interface turns red if the SDI input is not locked (no or bad SDI signal)