Junger Audio C8612 - Dolby® D/D+/AAC encoder - Manual (Page 8)

digital audio
modular
processing system
C8000
Dolby Digital / Digtal plus / Pulse (AAC) encoder
C8612
8/20
SETUP / ROUTING :
Setup of the module and the Bus routing
The Dolby OEM module CAT561 has 8 physical PCM audio inputs and may be configured
for 4 different operating modes :
A) Two independent encoders stream 1 – 5.1 (D-D, D-D plus, AAC, HE-AAC)
(independent audio inputs stream 2 – 2.0 (D-D, D-D plus, AAC, HE-AAC)
Independent metadata)
B) Two 5.1 encoders
stream 1 – D-D, D-D plus, AAC, HE-AAC
with different data rates stream 2 – D-D, D-D plus, AAC, HE-AAC
(but same audio inputs)
C) Two encoders used for
one stream for the main audio, one stream for an associated
associated services audio. The streams may be output in parallel from both encoders
(AKA dual PID – DVB packet identifier) :
Encoder 1 – 5.1
acmod: 3/2L … 1/0
L / R
DOLBY® CAT561 OEM Board (Firmware 2.4.0.3 and higher)
ENCODER CONFIGURATION two independent encoders
Encoder 2 – 2/0
acmod: 2/0 or 1/0
C / LFE
Ls / Rs
2L / 2R
Metadata Multiplexer
Consumer Metadata
Metadata Multiplexer
Consumer Metadata
Program 1
Program 2
D-D / D-D plus
AAC / HE-AAC v1/v2
D-D / D-D plus
AAC / HE-AAC v1/v2
Encoder 1 – 5.1
acmod: 3/2L … 1/0
L / R
DOLBY® CAT561 OEM Board (Firmware 2.4.0.3 and higher)
Encoder 2 – 5.1
acmod: Encoder 1
C / LFE
Ls / Rs
Metadata Multiplexer
Consumer Metadata
Metadata Multiplexer
Consumer Metadata
Program 1
ENCODER CONFIGURATION dual 5.1 encoders
D-D / D-D plus
AAC / HE-AAC v1/v2
D-D / D-D plus
AAC / HE-AAC v1/v2
Encoder 1 – 5.1
acmod: 3/2L … 1/0
L / R
DOLBY® CAT561 OEM Board (Firmware 2.4.0.3 and higher)
ENCODER CONFIGURATION two associated encoders – dual stream (PID)
Encoder 2 – 2/0
acmod: 2/0 or 1/0
C / LFE
Ls / Rs
2L / 2R
Metadata Multiplexer
Consumer Metadata
Metadata Multiplexer
Consumer & Mixing Metadata
Program 1
Program 2
D-D plus
D-D plus
mixing enable