Junger Audio C8612 - Dolby® D/D+/AAC encoder - Manual (Page 19)

digital audio
modular
processing system
C8000
Dolby Digital / Digtal plus / Pulse (AAC) encoder
C8612
19/20
METADATA ENC 2 :
Shows the set of metadata which are relevant for the second encoder.
The example below is for "Metadata Source = Preset" :
If the Metadata Source is "Preset" (internal) you may change these values at any time. If the source is
Bus & Preset you may partially overwrite it as long as there are valid metadata at the input.
If there are no valid metadata at the input the module enters the Reversion Mode.
For the reversion preset such overwrite checkboxes will not be displayed! And a hint is given :
If you switch Reversion Mode to "last used", you may load any preset and you will get the check
boxes to decide which parameter must be overwritten if you load that preset during regular operation.