Junger Audio C8088 - Mix-Matrix & Limiter - Manual (Page 4)

digital audio
modular
processing system
C8000
8 Channel Mix Matrix with Limiter
C8088
Jünger Audio Studiotechnik GmbH
Justus‐von‐Liebig‐Strasse 7
D ‐12489 Berlin
Germany phone: +49‐30‐677721‐0
fax: +49‐30‐677721‐46
info@junger‐audio.com
www.junger‐audio.com
4/12
rotary encoder settings
I/O not
used
MODE not
used
CAN
0 – F
The 16 switch positions are hexadecimal numbers (0x0 to 0xF) it sets the
CAN ID. Each module within a frame must be assigned a unique CAN bus
address for proper communication with other parties of the frame, e.g. the
frame controller or the GPI/O module.
Important note! This address also sets the position of the module graphic when you control the frame
via the web GUI by a C8702 frame controller. See C8k system manual for details.
remote control operation
- Web-server based remote control of parameters via frame controller C8702
- 3
rd
party remote control by http protocol based API
(please contact Junger Audio for details)
- Hardware GPI/O control of preset operation and special module functions
- Remote control by the brc8x Broadcast Remote Controller via CAN bus