ILUMINARC Ilumipod™ 42 IP - Manual (Page 18)

Operation
14 Ilumipod 42 IP Optic Series User Manual Rev. 6
Menu Map (RGBW Fixtures)
1 st Level Programming Levels Description
STAT
R (red)
000~255
Combines red, green, blue, and white to form a
custom color G (green)
b (blue)
w (white)
ST (strobe)
00~20 Strobe frequency (0~20 Hz)
AUTO
AT.1~10 Selects any of the 10 auto programs
PR.1~10 Selects any of the 10 custom (editable) programs
RUN
dMX Operates with a DMX controller
SLAV Operates with a master fixture
dMX d.001~512 Sets the DMX starting address
PERS
TOUR 11 channels (RGBW, D, S, CM, A, AS, DS, ID)
ARC.1 3 channels (RGB)
AR1.D 4 channels (RGB, D)
ARC.2 4 channels (RGBW)
AR2.d 5 channels (RGBW, D)
AR2.S 6 channels (RGBW, D, S)
HSV 3 channels (hue, saturation, value)
Id Id.01~66 Assigns an ID address to the fixture
EDIT
PR.
01~10 SC.
01~30
R (red)
000~255
Combines red, green, blue, and white to form a
custom color G (green)
b (blue)
w (white)
Sb (strobe) 00~20 Strobe frequency (0~20 Hz)
T (time)
000~255
Step duration
F (fade) Fade duration
SET
UPLd (upload) Uploads custom programs to another fixture
REST (reset) Resets the fixture to factory settings
Id (ID addressing) ON/OFF Turns ID addressing on or off
COLO
(color calibration)
OFF Max output when RGBW faders are at 255
RGbw (RGB to white) Pre-set output when RGBW faders are at 255
UC (Universal Color) Output matches that of older fixtures
dIM
(dimmer speed) OFF Makes dimmer curve linear
dIM1~4 Changes the dimmer curve (fast ó slow)
CAL1
wT.01~11
(White
temperature)
R (red)
000~255
Modifies the white temperature used in the
macros channel (TOUR, channel 6)
G (green)
b (blue)
w (white)
CAL2
RGbw
(RGB to white)
R (red)
000~255
Modifies the white color used when SET >
COLOR > RGbw is active
G (green)
b (blue)
KEY ON/OFF Turns the password on or off