ILUMINARC Ilumipod™ 42 IP - Manual (Page 12)

Installation
8 Ilumipod 42 IP Optic Series User Manual Rev. 6
Make sure to
mount this fixture
away from any
flammable material as
indicated in the Safety
Notes.
Mounting
Before mounting this fixture, read and follow the safety recommendations indicated in the
Safety Notes section (page 2 of this manual).
Orientation
Always mount this fixture in any safe position while making sure that there is adequate
room around it for ventilation, configuration, and maintenance.
Rigging
The Ilumipod 42 IP Optic Series consists of the fixture body and a single heavy duty
mounting bracket with 13mm screw holes. ILUMINARC
® recommends following the
general guidelines below when mounting the Ilumipod 42 IP Optic Series.
· When selecting an installation location, consider ease of access to the fixture for
operation, programming adjustments, and routine maintenance.
· Do not allow the product to remain pointed straight down.
· Make sure that the location where you are mounting the fixture can support its weight.
Please see the Technical Specifications section of this manual for the weight requirement
of this fixture.
Procedure
The Ilumipod 42 IP Optic Series comes with a single heavy duty mounting bracket to which
you can attach “C” or “O” clamps. You must supply your own “C” or “O” clamps and make
sure that they are capable of supporting the weight of this fixture.
C Clamp
(not included)
Secure safety cable
through loop on rear of
fixture