D-Link DES-2218 - Manual (Page 79)

DES-2218 Ethernet Switch User’s Guide
Boot Configuration File
67
Enables or disables authentication failure traps for invalid SNMP
community names. The argument may be enable or disable .
♦
clear-SNMP-comm-table
Clears the switch’s SNMP community name table.
♦
SNMP-community community permissions
Adds community to the switch’s list of SNMP communities, with access
permissions. The community name can be up to 32 characters long.
Permissions can be
read , for read-only community access, or write ,
for read-write community access.
♦
clear-ip-trap-manager-table
Removes all entries from the switch’s trap manager list.
♦
ip-trap-manager address community
Adds the host at address to the switch SNMP trap manager list. Traps
sent to the host will use community name community, which may be a
string up to 32 characters long.
♦
PFT-Entry mac-address recv-port allowed-ports
Adds entries to the switch’s forwarding table. The mac-address
corresponds to the source Ethernet address, in the form
xx:xx:xx:xx:xx:xx. The recv-port is the port from which packets from
the station may be received. The allowed-ports field lists the ports to
which packets from the station may be forwarded, separated by slashes.