D-Link DES-2218 - Manual (Page 64)

52
Using the Console Interface
Figure 6-22. System Reset
2. Move the cursor to Yes to confirm the reset and press Enter. The
switch should restart.
Factory Reset
Before performing a factory reset, be absolutely certain that this is what you
want to do. Once the reset is done, all of the switch’s settings stored in
NVRAM (including TCP/IP parameters, SNMP parameters, the
enabled/disabled settings of ports, security settings, etc.) will be erased and
restored to their factory default settings.
1. Choose Factory Reset NVRAM to Default Value from the main menu.