Daewoo SH-3510P - Manual (Page 53)

51
Audio Setup
Select a Digital Output.
Set audio output to coaxial or optical. You
can set the outgoing digital signal to
BITSTREAM or LPCM:
2
Select a Dynamic Range.
You can set the Dynamic Range as follows:
• Off : You can hear the sound as it was
originally recorded on the disc.
• Full : You can hear loud sounds softer
and soft sounds louder.
3
■ A user may select an audio menu according to the speaker set being used.
While in STOP or RESUME STOP mode,
press [SETUP] button. 1
• BITSTREAM : The raw audio signal
recorded on the disc goes to the digital
audio output.
• LPCM : The decoded audio signal goes
to the digital audio output.
DIGITAL OUT
DYNAMIC RANGE BITSTREAM
OFF
DIGITAL OUT
DYNAMIC RANGE BITSTREAM ✓
LPCM
DIGITAL OUT
DYNAMIC RANGE
FULL
OFF
✓
Setup