Daewoo SH-3510P - Manual (Page 40)

38
Playing a desired scene
If you want to search with a track number, press
[SEARCH] button once.
If PBC is OFF, the screen like the figure to the right
appears. It shows current and total track
numbers. Please enter the new track number to
be searched using the [NUMBER] button.
* If PBC is ON, pressing track number converts PBC to
OFF mode automatically.
1
After completing the enteries, please press
[ENTER].
PLAY starts from the selected position.
3
If you want to search with a track time, press
[SEARCH] button twice.
If PBC is OFF, the screen like the figure to the right
appears.
It shows total track time.
Please enter the new time to be searched using the
[NUMBER] button.
2
0 0 1 / 0 1 3
➟
total track
number
➟
current track
number
0 1 : 0 3 : 2 0
➟
current time
■ Storing a MARKER in the DVD memory is similar to marking your page in a book. It allows you to
quickly return to any point on the disc.
Storing a marker in the memory.
Press [MARK] during play and press
[PROGRAM] at the starting point of the section
to be viewed (listened to) again.
1
Recalling/ Clearing a marker
Press [MARK] during playback. Press [ œ √ ] to select the marker to be
recalled/cleared.
Press [ENTER] to recall a marker. Or press [CLEAR] to clear a marker.
Play resumes from the point corresponding to the selected marker, or the
selected marker is cleared.
2
1 - - - - - - - -
Searching VCD with a track or track time
Storing markers in memory to be viewed (listened to) again