Etymotic ER•200DW8 Personal Noise Dosimeter with Data Logging - Manual (Page 35)

35
Allow Previous Results to Be Overwritten
The dosimeter automatically overwrites the oldest data
when the device memory is full without signaling the user.
For more information on memory capacity and the number
of data runs that can be stored, see pages 18-19.
Unchecked: Ensures that new data do not overwrite older
saved data in the device. LEDs indicate when the device
memory is full. Data must be downloaded and/or removed
from the device to clear the memory for more runs.
Power Button Functions
The Power Button is used to select the type
of run. This sequence cannot be changed.
About Your ER-200DW8
Displays identifying information about the
connected dosimeter, which is useful to the factory if
troubleshooting a specific device is necessary.
From the Setup screen, click “About Your ER-200D”
Information on the “About Your ER-200D” screen cannot
be changed by the user.