Etymotic ER•200DW8 Personal Noise Dosimeter with Data Logging - Manual (Page 18)

18
Data Logging
Normal and QuickCheck results are stored in the dosimeter
and can be downloaded, saved and printed using the
ER-200DW8 Utility Suite. See Utility Suite User Guide for
instructions and information.
Memory Capacity
The ER-200DW8 has a non-volatile memory. Data
stored in the device are retained even if the batteries are
removed after a completed run. Data can be downloaded
and saved to a PC after each run or after multiple runs.
The ER-200DW8 can be set to overwrite data when its
memory is full; in this case, the oldest run is the first to be
overwritten. If the ER-200DW8 is set so that data is not
overwritten, when the device memory is full, data must be
downloaded and/or removed from the device to clear the
memory for further data runs.
There are 48 blocks of data storage available in the
instrument. The number of “runs” the device can store
depends on the type and length of each run.
QuickCheck: 2 blocks
Normal (1 hr): 2 blocks
Normal (16 hr): 5 blocks
Normal (3 days): 19 blocks
Normal (5 days): 31 blocks
Normal (7 days): 43 blocks