DynaScan 55″ 3000 nit High Brightness LCD with Super Narrow Bezel DS551LX4 - Manual (Page 22)

DS551LX4 User Manual 21
Range 0 – 100.
High Level Time HH:MM Set high level time.
Low Level Time HH:MM Set low level time.
Local Dimming High
Adjusts the contrast. High is the highest
contrast. Off is the lowest contrast.
ITEM 1 ITEM 2 DEFAULT DESCRIPTION
DHCP On
Choose to enable or disable the DHCP
function. If enabled, the display will assign
the IP address, Subnet mask and Default
gateway automatically. If disabled, the
following values will be entered manually.
IP 192.168.0.100 Assign IP address.
Mask 255.255.255.0 Assign Subnet mask.
Network
Gateway 192.168.0.1 Assign Default gateway.
ITEM 1 ITEM 2 DEFAULT DESCRIPTION
Display Mode Landscape
Change the Menu orientation. The Menu
can be displayed in either LANDSCAPE or
PORTRAIT mode.
Screen Saver Off
Turn on / off image burn-in protection.
Set image burn-in protection interval.
Remote Control RS232
Choose to use the remote control function
RS232 or Network.
IR Control On
Enable/disable the remote control for Menu.
Note: When disabled, the remote control
function can be enabled again from the
control panel on the display or through the
DynaScan “Display Manager” application.
Advance
Power Off Mode Standby
When in Power Off Mode, RS-232 controls
do not function. Only [Main Power Switch]
on the display or [Power Button] on the
remote control can wake up the display.