Drylam Fujipla LPE3510 Roller Laminator - Manual (Page 6)

3. WARMING UP:
Set Operation Lever to LAMINATE position. Turn on Power Switch. POWER lamp (red) will glow.
• LAMINATE: Rollers will be closed.
• OPEN: Rollers will be opened.
Set temperature according to the object to be laminated:
Machine LPE 3510 (13”) LPE 6510 (25”)
Item to be laminated Film thickness Film thickness
1.5mil 3.0mil 1.5mil 3.0mil
Thin Paper, Copying Paper,
Printing Paper, Brochure
6-7 7-8 7-8 7-8
Thick Paper, Business Card, Thick
Printing Paper, Photo Paper
7-8 8-9 8-9 8-9
The setting may be affected by room temperature conditions.
Lamination is an art form. Experimentation is the key to successful results.
The above settings are for “School-Lam” film. There are some higher quality films which will melt at lower
temperatures. Consult the directions for the film being used.
READY lamp (green) will glow indicating the machine is now ready for laminating.