Drylam Fujipla LPE3510 Roller Laminator - Manual (Page 3)

Thank you for your purchase of the Fujipla LPE3510 or LPE6510 laminator. This laminating machine is designed to
laminate most common paper stocks, inks and toners with transparent lamination film. Laminated objects are
waterproof and durable as well as having a lustrous appearance. Please note that, once laminated, it is difficult to peel
off the film from the laminated object without damage to it. Be sure to read this instruction manual thoroughly before
operating your Lamipacker to avoid danger and the possibility of poor quality laminations.
Dry-Lam LLC is the exclusive distributor of Fujipla products in North America. Contact Dry-Lam’s Tech-Line at 888-633-
1973 x8575 for any service related issue.
WARNING BEFORE USING YOUR LAMIPACKER:
Do not open the casing of the Lamipacker or disassemble the machine unless directed by Dry-
Lam’s Tech-Line.
If problems (e.g. jamming, etc.) occur, switch off and unplug immediately and then contact
Dry-Lam’s Tech-Line.
Be careful that your tie, necklace, hair, etc. do not get caught in the machine. In such a case,
switch off immediately.
Do not spill water on the Lamipacker. Do not operate it with wet hands.
Do not set the Lamipacker on the power cord.
Be sure to unplug before moving the Lamipacker.
The surface of Lamipacker and laminated objects may be hot.
Do not laminate prohibited materials (see next item "laminating objects" on page 4).
In the case of incorrect threading/setup, laminating prohibited materials or laminations performed incorrectly smoke
may come out of the laminator.
The safety cover should always be placed correctly. Always ventilate the area well when operating. The laminator should
be located close to the wall outlet and easily accessible.
Recycling Information:
Thank you for choosing this Fujipla product. It is an electronic device containing components which require proper
disposal at the end of their effective life. You can help control emerging risks by disposing the electronic device and your
domestic waste separately. Electric and electronic devices are marked with a crossed out waste bin indicating that these
products should not be dumped together with domestic waste. If being dumped together with domestic waste electric
and electronic equipment may have severe impacts on the environment as well as human health the least of which due
to the possibly of hazardous materials.
In accordance with the European WEEE directive Fujipla provides an easy way to recycle waste of electric and electronic
equipment. Please dispose of electric and electronic equipment waste by using your local collection site for this type of
waste.