Doremi S2H-30 - Manual (Page 5)

Protecting Yourself and the S2H-30
Never touch the AC plug with wet hands. Always disconnect the S2H-30 from the power supply
by pulling on the plug, not the cord. Allow only a Doremi Labs dealer or qualified professional
engineer to repair or reassemble the S2H-30. Apart from voiding the warranty, unauthorized
engineers might touch live internal parts and receive a serious electric shock. Do not put, or
allow anyone to put any object, especially metal objects, into the S2H-30.
If water or any other liquid is spilled into or onto the S2H-30, disconnect the power and call a
Doremi dealer. The unit must be well ventilated and away from direct sunlight. To avoid damage
to internal circuitry, as well as the external finish, keep the S2H-30 away from direct sources of
heat (heater vents, stoves, radiators). Avoid using flammable aerosols near the S2H-30. They
can damage the surface area and may ignite. Do not use denatured alcohol, paint thinner, or
similar chemicals to clean the S2H-30. This can damage the unit.
Modification of this equipment is dangerous and can result in the functions of the S2H-30 being
impaired. Never attempt to modify the equipment in any way. In order to ensure optimum
performance of the S2H-30, select the setup location carefully and make sure the equipment is
used properly. Avoid setting up the S2H-30 in the following locations:
• In a humid or dusty environment.
• In a room with poor ventilation.
• On a surface which is not level.
• Inside a moving vehicle where it will be subject to vibration.
• In an extremely hot or cold environment.
S2H.OM.001540.DRM Page 5 of 39 Version 1.4
Doremi Labs