Doremi S2H-30 - Manual (Page 18)

3.7 System Menu
The System menu allows access to the system parameters.
Sub-Menu Description
Save Save current settings to flash.
Select to Save, when the “?” appears
select again to confirm.
Firmware: x.y Firmware version
Serial: zzzzzzz Serial number
License: uuuuuuuu License number
Temp: vv C Temperature (in degree Celsius)
Standby Standby mode. Puts the unit in Power
Down mode.
Auto Standby Auto Standby mode. Sets the idle time
duration before the unit goes in power
down mode automatically.
IR Infra-Red. To avoid IR interference with
multiple S2H-30 units, assign each a
different IR code from 0x0 to 0xF (16
total) default is 0. Set the DIP switch on
the Doremi IR remote accordingly.
3.8 Status Menu
The Status menu can be used to view the Input and Output status.
Sub-Menu Description
In:
Out: Input and Output format status
information.
S2H.OM.001540.DRM Page 18 of 39 Version 1.4
Doremi Labs