Doremi S2H-30 - Manual (Page 16)

3.5 Audio Menu
The Audio menu can be used to set up the audio parameters.
Sub-Menu Value Description
Input SDI Audio input is set to SDI by
default. It is the only input
interface available.
Delay X frames Audio delay setting from -1 to +2
frames.
Level -18, -12, -6, 0, +6, +12,
+18 dB Audio Output level setting.
Swap Channels 3
and 4 When selected input channel 3
will be output on channel 4 and
input channel 4 will be output on
channel 3.
HDMI Channel Out Auto
2
4
6
8
Off Set the HDMI audio output mode.
Auto: All audio inputs will be
present on the HDMI output.
2, 4, 6, 8: Total number of audio
channels to be present on the
HDMI output.
Off: No audio on HDMI output.
3.5.1 Supported Audio Sample Rates
• HDMI Output: 48 kHz
• SDI Input: 48 kHz
Note: The S2H-30 does not support audio sample rate conversions. If using audio on the HDMI
input, the sample rate must be 48kHz. Using unsupported audio sample rates will result in
degraded audio output.
S2H.OM.001540.DRM Page 16 of 39 Version 1.4
Doremi Labs