Doremi DSDI-20s - Manual (Page 21)

5.6 Miscellaneous
To enter the “Miscellaneous” window presented in Figure 15, go to the Miscellaneous icon of the
menu using the remote controller arrows – see Figure 5 - and hit “Select” – see Figure 1.
The “Miscellaneous” window allows you to set Miscellaneous parameters using the navigation
arrows and “Select” buttons – see Figure 1.
Figure 15: “Miscellaneous” Window Example
This menu can be used to reset the factory default settings of the unit. It also displays the
monitor’s native resolution, the current DVI output resolution, the current DVI output frequency,
the infrared remote control status, the current input and the firmware version. After you reset the
factory defaults, you MUST recycle power on the unit.
Note that some items might not be present for all DVI20-devices. For example, the DSDI-20
related “Miscellaneous” window would not contain “Current DVI Out Resolution”.
DVI.OM.000262.DRM Page 21 of 33 Version 1.4
Doremi Labs